Posts Tagged ‘Front Breaks’
-
Sunday, March 18th, 2007
DIY: Part II — Replacing Front Rotors and Brake Pads on a Land Rover Discovery II
In Part I, I changed the rear rotors and pads of my Land Rover Discovery II. Last weekend, I tackled Part II, changing the front set. The process isn’t much different than the back except that the caliper and pads are much bigger.
The only additional tools you will need from the rear change is a 19mm 12pt socket with a short extension. The caliper is bigger, so are the bolts holding it. Also, you will need to be a bit careful with the ABS sensor. There is a mounting that holds the sensor in place, you will need to gently remove the wire from the mounting plate so you can get your socket wrench to the bolt. Once you remove the caliper, compressing the piston (two of them) and brake pads is exactly the same as the rear.
Completed front rotor and brake pads
About the archives
Welcome to the archives here at MAVROMATIC.
These are a collection of our previous posts. If you'd like to read about the latest and greatest, click here.
Welcome to mavromatic! My goal is to bring to your attention the latest DIY projects, the greatest home automation and home theater products. As well as, the occasional offbeat entry, to spice things up a bit.
