![](data:image/svg+xml;charset=utf-8,<svg height="260px" width="390px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
![](data:image/svg+xml;charset=utf-8,<svg height="273px" width="390px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
UPDATE: The touchscreen model I’m using is a 15″ 3M MicroTouch ChassisTouch LCD Monitor.
In Part 1 of the DIY: Inwall 15″ LCD touchscreen, I talked about the parts I’m using. I ended up going with a commercial 15″ touchscreen chassis instead of the NEC display I initially posted about. I didn’t want to mess around with taking apart the NEC monitor and trying to figure out how to mount it. So I bought one that was made specifically for custom installations. For the frame, I ended up using solid Alder and created a profile I wanted using a Delta Unisaw.
I stained the frame a dark merlot to match my front door. I painted the back of the frame a flat black to act as a shadow. If you look at the following photo, you can see how I’m going to mount the frame to the wall.
![](data:image/svg+xml;charset=utf-8,<svg height="293px" width="390px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
![](data:image/svg+xml;charset=utf-8,<svg height="309px" width="390px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
The “mounts” hang on the “rails” and two small screws on the top and bottom hold it tight to the wall and in place. The area where the touch screen is being mounted has all the nessessary connections (i.e. power, VGA, audio) inside of the wall. I will be posting more photos with the LCD mounted in the frame as soon as the finish dries.
View Comments (16)
-
-
-
-
-
-
-
-
-
-
1 2 Next »Very cool. What is the make/model of the commercial unit? Cost?
Very cool. What is the make/model of the commercial unit? Cost?
Can we get more info on this! What model NEC? How much? Are there more pictures?
Can we get more info on this! What model NEC? How much? Are there more pictures?
I did something similar...kind of. Mine's not a touchscreen but does have some buttons for different macro's, and is in a picture frame format. Check it out at http://www.patjames.com/usemod/wiki.pl?Kiosk_PC
I did something similar...kind of. Mine's not a touchscreen but does have some buttons for different macro's, and is in a picture frame format. Check it out at http://www.patjames.com/usemod/wiki.pl?Kiosk_PC
I will post some more photos and specs on the monitor tonight...
Pat, great job on the frame!
Danny
I will post some more photos and specs on the monitor tonight...
Pat, great job on the frame!
Danny
I'm a rep of 3M in Chicago, Interested in your feedback of how well our chassis touch screen works for you. Looks good so far. There is a newer 17" version available and the 15" will soon have the power supply built into the chassis.
Regards,
Gunter.
I'm a rep of 3M in Chicago, Interested in your feedback of how well our chassis touch screen works for you. Looks good so far. There is a newer 17" version available and the 15" will soon have the power supply built into the chassis.
Regards,
Gunter.